The insight how to wear a tie correlates with the sort of tie amongst multiple types of neckties you are inclined to wear. There are multiple notions on the part of proper way to wear a tie to understand for perfect and appropriate matching. These areas to be insightful are: the proper tie length how long should a tie be?
Table Of Contents
How Long Should A Tie Be?
The rules are relatively simple when it comes to proper tie length. Basically, when you stand in your natural pose the tip of your tie should end in the center of your waistband (or belt if you have one).
The detailed guide below could be used as a resource to help you achieve the correct length of the tie each time.
As in every team, the subtle details are critical to obtain the whole thing together in a variety of ways. You are just as strong as your weakest link, as the old saying goes, and that is certainly true of looking good in a suit and a tie. So, take care of the minor but critical details!
Useful Tips for the Proper Tie Length
- Too Long: the tie stretches way past the belt / waistband
- Appropriate length: The “diamond” tip sits in the center of the waistband / belt
- Too Short: You can see some daylight between your waistband and where the tie ends, exposing the fabric of your shirt
It is so easy, really. Upon tying your tie, step back and take a quick glance into the mirror to check your work.
The torso of each individual is different in length, and various pairs of pants can sit at slightly different heights. For example, the waistband sits about 2-3′′ (5 – 7 cm) higher when I wear a custom suit with braces than on a pair of pants worn with a belt. It is called the trousers’ “rise.”
Diamond Vs Square Tip Ties
We have been delighted to see the return of the square tip tie, most often seen in knit ties. It is a bit of a retro flavor that can add points to your overall style!
The “rule” remains the same, for both the diamond and the square when it comes to the proper way to wear a tie. You should intend to hit the middle of the waistband/belt by the bottom of the tie. This would be the point at the tip for the diamond, and the flat edge at the bottom for the square necktie.
Standard Tie Vs Long Tie Length
If you are over 6 feet, have a long or slightly rounded torso, you may not be “fitted” by a standard length tie. In doing that, I think the rear fabric / silk loop is too short to loop around the inside of the tie.
While theoretically it is possible that the tie is too small for you, I just will not go and throw away your links! Do not tie it very short either, just so you can loop through the back.
Alternatively, just add a tie bar to both ends of the tie placket and the shirt placket, creating one strong unit. The tie bar is positioned between the 3rd and 4th buttons, so high enough for most men to “catch” the tiny fabric end on the back. You can also always look to buy extra-long ties (usually between 60 – 63′′ long, versus 57′′ for a standard tie in length) or even go custom-made.
There are some really good and affordable options for both long and custom ties now out there, if you take the time to look around. I like the odd custom tie especially if you find a perfect piece of fabric to make it from.
Maintain Your ‘Natural’ Posture
We have all been there in the morning, standing attentively while getting dressed, but is that really your natural posture? You will “fall back” into your natural posture over that day, or even within a few minutes, and the tie will be too long.
The quick solution is walking around only for a minute or two, putting on your shoes and seeing how the tie looks? Through time, you are going to get a clear sense about where you will be during the day to get it on track.
Consider the Tie Clip
To be insightful of the proper way to wear a tie entails the consideration on the part of the usage of tie clip as well. One advantage to this is that you can make minor adjustments to the length using your tie pin. You should have a bit of a poof when wearing a tie bar which is from the excess fabric that allows you to move your neck while not suffocated!
This gives us the chance to have a wiggle room around 0.5 – 1′′ if your tie is not spot on. By pushing the fabric slightly up or down in the tie bar it enables you to correctly repair the tie end points. Do not overdo it, please. Again, if it is too far away, then just start over…
Do not forget leaving your valuable comment on this piece of writing and sharing with your near and dear ones. To keep yourself up-to-date with Information Palace, put your email in the space given below and Subscribe. Furthermore, if you yearn to know about the benefits of healthy food, view our construct, “What Are the Benefits of Healthy Food?”